fish64a
Product Description
TCXT/TXCP series spout magnetic separator is mainly used for separating magnetic metal impurities from the raw materials. It is suitable for feed mills, cereal and oil processing plants, solvent factories and breweries in all scales, and generally installed in the processing pipelines.
Working Principle
The granule (powder) raw material and the magnetic impurity mixed into the raw material form a relatively uniform annular layer around the permanent magnet after entering through the inlet, wherein the magnetic metal inclusion is attracted to the magnetic pole plate surface of the permanent magnet due to being magnetized by the magnetic field. the granule (powder) raw material flows out of the machine from the magnetic field region through the lower end outlet, thereby achieving the purpose of separation.
Feature
鈼?High efficiency removing irony material.
鈼?High magnetic strength, long service life.
鈼?Compact structure, convenient operation.
鈼?Widely used in grain processing and handling industry.
鈼?Body material: Stainless steel / Carbon steel.
Technical Parameter
ModelSize (mm)Capacity (t/h)
TXCT12蠁200脳3705
TCXT15蠁300脳60015
TCXT20蠁330脳60030
TCXT25蠁400脳60050
TCXT30蠁450脳80080
TCXT35蠁500脳950120
TCXP30300脳230脳39020
TXCP40400脳230脳39030
TCXP50500脳230脳39040
Installation
(1) In order to prevent blockage caused by large impurity entering the machine, this equipment is generally installed after the primary cleaning screen.
(2) This equipment should be installed in vertical pipelines (the length of vertical pipelines above the equipment should be 鈮?00mm) and placed as much as possible
on the floor, to facilitate the cleaning of iron impurities.
(3) In view of the impact of materials on the equipment has a certain impact on the efficiency of iron, a buffer device shall be provided at the top.
The material flow rate should be no more than 1m/s.
Packing and Delivery
For safety transportation purpose, we use standard exporting packing for all the machines. Packing method such as wood box/tray, steel box/tray etc, to ensure the machine will be reached to you safely.
Our Service
[Consulting Service] Our consultant provides you with pre-sales expertise consulting services, system evaluation, providing the best engineering solution
[Engineering Service] Set up special project team of technical, installation and sales for you. to design, install and commissioning a complete set of equipments, whole process tracking service.
[Site service] Our service engineer goes deep into your site to solve practical problems. Conduct on-site training on the use of products and seek for improvement of a new way of thinking and method to reduce cost and increase efficiency.Grain Cleaning Equipment
website:http://www.chinagrainmachine.com/grain-handling-equipment/grain-cleaning-equipment/
TCXT/TXCP series spout magnetic separator is mainly used for separating magnetic metal impurities from the raw materials. It is suitable for feed mills, cereal and oil processing plants, solvent factories and breweries in all scales, and generally installed in the processing pipelines.
Working Principle
The granule (powder) raw material and the magnetic impurity mixed into the raw material form a relatively uniform annular layer around the permanent magnet after entering through the inlet, wherein the magnetic metal inclusion is attracted to the magnetic pole plate surface of the permanent magnet due to being magnetized by the magnetic field. the granule (powder) raw material flows out of the machine from the magnetic field region through the lower end outlet, thereby achieving the purpose of separation.
Feature
鈼?High efficiency removing irony material.
鈼?High magnetic strength, long service life.
鈼?Compact structure, convenient operation.
鈼?Widely used in grain processing and handling industry.
鈼?Body material: Stainless steel / Carbon steel.
Technical Parameter
ModelSize (mm)Capacity (t/h)
TXCT12蠁200脳3705
TCXT15蠁300脳60015
TCXT20蠁330脳60030
TCXT25蠁400脳60050
TCXT30蠁450脳80080
TCXT35蠁500脳950120
TCXP30300脳230脳39020
TXCP40400脳230脳39030
TCXP50500脳230脳39040
Installation
(1) In order to prevent blockage caused by large impurity entering the machine, this equipment is generally installed after the primary cleaning screen.
(2) This equipment should be installed in vertical pipelines (the length of vertical pipelines above the equipment should be 鈮?00mm) and placed as much as possible
on the floor, to facilitate the cleaning of iron impurities.
(3) In view of the impact of materials on the equipment has a certain impact on the efficiency of iron, a buffer device shall be provided at the top.
The material flow rate should be no more than 1m/s.
Packing and Delivery
For safety transportation purpose, we use standard exporting packing for all the machines. Packing method such as wood box/tray, steel box/tray etc, to ensure the machine will be reached to you safely.
Our Service
[Consulting Service] Our consultant provides you with pre-sales expertise consulting services, system evaluation, providing the best engineering solution
[Engineering Service] Set up special project team of technical, installation and sales for you. to design, install and commissioning a complete set of equipments, whole process tracking service.
[Site service] Our service engineer goes deep into your site to solve practical problems. Conduct on-site training on the use of products and seek for improvement of a new way of thinking and method to reduce cost and increase efficiency.Grain Cleaning Equipment
website:http://www.chinagrainmachine.com/grain-handling-equipment/grain-cleaning-equipment/
- День рождения
- 4 Сен 1985 (Возраст: 38)
- Имя
- http://www.chinagrainmachine.com/grain-handling-equipment/grain-cleaning-equipment/
